From dafebc5bb70303f0b5baf0b087cf4d9a64b5c7f0 Mon Sep 17 00:00:00 2001 From: marha Date: Mon, 12 Sep 2011 11:27:51 +0200 Subject: Synchronised line endinge with release branch --- openssl/makevms.com | 2822 +++++++++++++++++++++++++-------------------------- 1 file changed, 1411 insertions(+), 1411 deletions(-) (limited to 'openssl/makevms.com') diff --git a/openssl/makevms.com b/openssl/makevms.com index fe8271405..8c59c67ca 100644 --- a/openssl/makevms.com +++ b/openssl/makevms.com @@ -1,1411 +1,1411 @@ -$! -$! MAKEVMS.COM -$! Original Author: UNKNOWN -$! Rewritten By: Robert Byer -$! Vice-President -$! A-Com Computing, Inc. -$! byer@mail.all-net.net -$! -$! Changes by Richard Levitte -$! Zoltan Arpadffy -$! -$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" -$! "[.xxx.EXE.SSL]LIBSSL.OLB" -$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX. -$! -$! This procedures accepts two command line options listed below. -$! -$! Specify one of the following build options for P1. -$! -$! ALL Just build "everything". -$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file. -$! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file. -$! SOFTLINKS Just fix the Unix soft links. -$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done. -$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library. -$! CRYPTO/x Just build the x part of the -$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library. -$! SSL Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library. -$! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program. -$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL. -$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL. -$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL. -$! -$! -$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P2. -$! For 32 bit architectures (VAX), P2 is ignored. -$! Currently supported values are: -$! -$! 32 To ge a library compiled with /POINTER_SIZE=32 -$! 64 To ge a library compiled with /POINTER_SIZE=64 -$! -$! -$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging -$! information. -$! -$! Specify which compiler as P4 to try to compile under. -$! -$! VAXC For VAX C. -$! DECC For DEC C. -$! GNUC For GNU C. -$! LINK To only link the programs from existing object files. -$! (not yet implemented) -$! -$! If you don't specify a compiler, it will try to determine which -$! "C" compiler to use. -$! -$! P5, if defined, sets a TCP/IP library to use, through one of the following -$! keywords: -$! -$! UCX for UCX or UCX emulation -$! TCPIP for TCP/IP Services or TCP/IP Services emulation -$! (this is prefered over UCX) -$! SOCKETSHR for SOCKETSHR+NETLIB -$! NONE to avoid specifying which TCP/IP implementation to -$! use at build time (this works with DEC C). This is -$! the default. -$! -$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) -$! -$! -$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT") -$ ON ERROR THEN GOTO TIDY -$ ON CONTROL_C THEN GOTO TIDY -$! -$! Check if we're in a batch job, and make sure we get to -$! the directory this script is in -$! -$ IF F$MODE() .EQS. "BATCH" -$ THEN -$ COMNAME=F$ENVIRONMENT("PROCEDURE") -$ COMPATH=F$PARSE("A.;",COMNAME) - "A.;" -$ SET DEF 'COMPATH' -$ ENDIF -$! -$! Check What Architecture We Are Using. -$! -$ IF (F$GETSYI("CPU").LT.128) -$ THEN -$! -$! The Architecture Is VAX. -$! -$ ARCH = "VAX" -$! -$! Else... -$! -$ ELSE -$! -$! The Architecture Is Alpha, IA64 or whatever comes in the future. -$! -$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") -$ IF (ARCH .EQS. "") THEN ARCH = "UNK" -$! -$! End The Architecture Check. -$! -$ ENDIF -$! -$! Get VMS version. -$! -$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM") -$! -$! Check To Make Sure We Have Valid Command Line Parameters. -$! -$ GOSUB CHECK_OPTIONS -$! -$! Check To See What We Are To Do. -$! -$ IF (BUILDCOMMAND.EQS."ALL") -$ THEN -$! -$! Start with building the OpenSSL configuration file. -$! -$ GOSUB CONFIG -$! -$! Create The "BUILDINF.H" Include File. -$! -$ GOSUB BUILDINF -$! -$! Fix The Unix Softlinks. -$! -$ GOSUB SOFTLINKS -$! -$ ENDIF -$! -$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL") -$ THEN -$! -$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. -$! -$ GOSUB CRYPTO -$! -$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library. -$! -$ GOSUB SSL -$! -$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine. -$! -$ GOSUB SSL_TASK -$! -$! Build The [.xxx.EXE.TEST] OpenSSL Test Utilities. -$! -$ GOSUB TEST -$! -$! Build The [.xxx.EXE.APPS] OpenSSL Application Utilities. -$! -$ GOSUB APPS -$! -$! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines. -$! -$ GOSUB ENGINES -$! -$! Else... -$! -$ ELSE -$! -$! Build Just What The User Wants Us To Build. -$! -$ GOSUB 'BUILDCOMMAND' -$! -$ ENDIF -$! -$! Time To EXIT. -$! -$ GOTO TIDY -$! -$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file. -$! -$ CONFIG: -$! -$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File. -$! -$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File." -$! -$! First, make sure the directory exists. -$! -$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN - - CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH'] -$! -$! Different tar/UnZip versions/option may have named the file differently -$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. "" -$ THEN -$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in" -$ ELSE -$ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. "" -$ THEN -$ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in" -$ ELSE -$ ! For ODS-5 -$ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. "" -$ THEN -$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in" -$ ELSE -$ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!" -$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found". -$ GOTO TIDY -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File. -$! Make sure it has the right format. -$! -$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H" -$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME' -RECORD - FORMAT stream_lf -$ OPEN /APPEND H_FILE 'OSCH_NAME' -$! -$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File. -$! -$ WRITE H_FILE "/* This file was automatically built using makevms.com */" -$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */" -$! -$! Write a few macros that indicate how this system was built. -$! -$ WRITE H_FILE "" -$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS" -$ WRITE H_FILE "# define OPENSSL_SYS_VMS" -$ WRITE H_FILE "#endif" -$ -$! One of the best way to figure out what the list should be is to do -$! the followin on a Unix system: -$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq -$! For that reason, the list will also always end up in alphabetical order -$ CONFIG_LOGICALS := AES,- - ASM,INLINE_ASM,- - BF,- - BIO,- - BUFFER,- - BUF_FREELISTS,- - CAMELLIA,- - CAST,- - CMS,- - COMP,- - DEPRECATED,- - DES,- - DGRAM,- - DH,- - DSA,- - EC,- - ECDH,- - ECDSA,- - ENGINE,- - ERR,- - EVP,- - FP_API,- - GMP,- - GOST,- - HASH_COMP,- - HMAC,- - IDEA,- - JPAKE,- - KRB5,- - LHASH,- - MD2,- - MD4,- - MD5,- - MDC2,- - OCSP,- - PSK,- - RC2,- - RC4,- - RC5,- - RFC3779,- - RIPEMD,- - RSA,- - SEED,- - SHA,- - SHA0,- - SHA1,- - SHA256,- - SHA512,- - SOCK,- - SSL2,- - STACK,- - STATIC_ENGINE,- - STDIO,- - STORE,- - TLSEXT,- - WHIRLPOOL,- - X509 -$! Add a few that we know about -$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',- - THREADS -$! The following rules, which dictate how some algorithm choices affect -$! others, are picked from Configure. -$! Quick syntax: -$! list = item[ ; list] -$! item = algos / dependents -$! algos = algo [, algos] -$! dependents = dependent [, dependents] -$! When a list of algos is specified in one item, it means that they must -$! all be disabled for the rule to apply. -$! When a list of dependents is specified in one item, it means that they -$! will all be disabled if the rule applies. -$! Rules are checked sequentially. If a rule disables an algorithm, it will -$! affect all following rules that depend on that algorithm being disabled. -$! To force something to be enabled or disabled, have no algorithms in the -$! algos part. -$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;- - DES/MDC2;- - EC/ECDSA,ECDH;- - MD5/SSL2,SSL3,TLS1;- - SHA/SSL3,TLS1;- - RSA/SSL2;- - RSA,DSA/SSL2;- - DH/SSL3,TLS1;- - TLS1/TLSEXT;- - EC/GOST;- - DSA/GOST;- - DH/GOST;- - /STATIC_ENGINE;- - /KRB5 -$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;- - /THREADS -$ -$! Architecture specific rule addtions -$ IF ARCH .EQS. "VAX" -$ THEN -$ ! Disable algorithms that require 64 bit integers in C -$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + - - ";/GOST" + - - ";/WHIRLPOOL" -$ ENDIF -$ -$ CONFIG_LOG_I = 0 -$ CONFIG_LOG_LOOP1: -$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") -$ CONFIG_LOG_I = CONFIG_LOG_I + 1 -$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1 -$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END -$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E) -$ THEN -$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES -$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO -$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES -$ ELSE -$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO -$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES -$ ! Because all algorithms are assumed enabled by default -$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO -$ ENDIF -$ GOTO CONFIG_LOG_LOOP1 -$ CONFIG_LOG_LOOP1_END: -$ -$! Apply cascading disable rules -$ CONFIG_DISABLE_I = 0 -$ CONFIG_DISABLE_LOOP0: -$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM") -$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1 -$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0 -$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END -$ -$ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM") -$ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM") -$ TO_DISABLE := YES -$ CONFIG_ALGO_I = 0 -$ CONFIG_DISABLE_LOOP1: -$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM") -$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 -$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1 -$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END -$ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. "" -$ THEN -$ TO_DISABLE := NO -$ ELSE -$ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO -$ ENDIF -$ GOTO CONFIG_DISABLE_LOOP1 -$ CONFIG_DISABLE_LOOP1_END: -$ -$ IF TO_DISABLE -$ THEN -$ CONFIG_DEPENDENT_I = 0 -$ CONFIG_DISABLE_LOOP2: -$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM") -$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 -$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2 -$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END -$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES -$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO -$ ! Better not to assume defaults at this point... -$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES -$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'" -$ GOTO CONFIG_DISABLE_LOOP2 -$ CONFIG_DISABLE_LOOP2_END: -$ ENDIF -$ GOTO CONFIG_DISABLE_LOOP0 -$ CONFIG_DISABLE_LOOP0_END: -$ -$! Apply cascading enable rules -$ CONFIG_ENABLE_I = 0 -$ CONFIG_ENABLE_LOOP0: -$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM") -$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1 -$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0 -$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END -$ -$ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM") -$ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM") -$ TO_ENABLE := YES -$ CONFIG_ALGO_I = 0 -$ CONFIG_ENABLE_LOOP1: -$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM") -$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 -$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1 -$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END -$ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. "" -$ THEN -$ TO_ENABLE := NO -$ ELSE -$ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO -$ ENDIF -$ GOTO CONFIG_ENABLE_LOOP1 -$ CONFIG_ENABLE_LOOP1_END: -$ -$ IF TO_ENABLE -$ THEN -$ CONFIG_DEPENDENT_I = 0 -$ CONFIG_ENABLE_LOOP2: -$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM") -$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 -$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2 -$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END -$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO -$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES -$ ! Better not to assume defaults at this point... -$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES -$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'" -$ GOTO CONFIG_ENABLE_LOOP2 -$ CONFIG_ENABLE_LOOP2_END: -$ ENDIF -$ GOTO CONFIG_ENABLE_LOOP0 -$ CONFIG_ENABLE_LOOP0_END: -$ -$! Write to the configuration -$ CONFIG_LOG_I = 0 -$ CONFIG_LOG_LOOP2: -$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") -$ CONFIG_LOG_I = CONFIG_LOG_I + 1 -$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2 -$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END -$ IF CONFIG_CHANGED_'CONFIG_LOG_E' -$ THEN -$ IF CONFIG_DISABLED_'CONFIG_LOG_E' -$ THEN -$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E -$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E -$ WRITE H_FILE "#endif" -$ ELSE -$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E -$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E -$ WRITE H_FILE "#endif" -$ ENDIF -$ ENDIF -$ GOTO CONFIG_LOG_LOOP2 -$ CONFIG_LOG_LOOP2_END: -$! -$! Add in the common "crypto/opensslconf.h.in". -$! -$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE: -$! -$ IF ARCH .NES. "VAX" -$ THEN -$! -$! Write the non-VAX specific data -$! -$ WRITE H_FILE "#if defined(HEADER_RC4_H)" -$ WRITE H_FILE "#undef RC4_INT" -$ WRITE H_FILE "#define RC4_INT unsigned int" -$ WRITE H_FILE "#undef RC4_CHUNK" -$ WRITE H_FILE "#define RC4_CHUNK unsigned long long" -$ WRITE H_FILE "#endif" -$! -$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)" -$ WRITE H_FILE "#undef DES_LONG" -$ WRITE H_FILE "#define DES_LONG unsigned int" -$ WRITE H_FILE "#undef DES_PTR" -$ WRITE H_FILE "#define DES_PTR" -$ WRITE H_FILE "#undef DES_RISC1" -$ WRITE H_FILE "#undef DES_RISC2" -$ WRITE H_FILE "#define DES_RISC1" -$ WRITE H_FILE "#undef DES_UNROLL" -$ WRITE H_FILE "#define DES_UNROLL" -$ WRITE H_FILE "#endif" -$! -$ WRITE H_FILE "#if defined(HEADER_BN_H)" -$ WRITE H_FILE "#undef BN_LLONG" ! Never define with SIXTY_FOUR_BIT -$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG" -$ WRITE H_FILE "#undef SIXTY_FOUR_BIT" -$ WRITE H_FILE "#define SIXTY_FOUR_BIT" -$ WRITE H_FILE "#undef THIRTY_TWO_BIT" -$ WRITE H_FILE "#undef SIXTEEN_BIT" -$ WRITE H_FILE "#undef EIGHT_BIT" -$ WRITE H_FILE "#endif" -$ -$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION" -$! -$! Else... -$! -$ ELSE -$! -$! Write the VAX specific data -$! -$ WRITE H_FILE "#if defined(HEADER_RC4_H)" -$ WRITE H_FILE "#undef RC4_INT" -$ WRITE H_FILE "#define RC4_INT unsigned char" -$ WRITE H_FILE "#undef RC4_CHUNK" -$ WRITE H_FILE "#define RC4_CHUNK unsigned long" -$ WRITE H_FILE "#endif" -$! -$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)" -$ WRITE H_FILE "#undef DES_LONG" -$ WRITE H_FILE "#define DES_LONG unsigned long" -$ WRITE H_FILE "#undef DES_PTR" -$ WRITE H_FILE "#define DES_PTR" -$ WRITE H_FILE "#undef DES_RISC1" -$ WRITE H_FILE "#undef DES_RISC2" -$ WRITE H_FILE "#undef DES_UNROLL" -$ WRITE H_FILE "#endif" -$! -$ WRITE H_FILE "#if defined(HEADER_BN_H)" -$ WRITE H_FILE "#undef BN_LLONG" ! VAX C/DEC C doesn't have long long -$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG" -$ WRITE H_FILE "#undef SIXTY_FOUR_BIT" -$ WRITE H_FILE "#undef THIRTY_TWO_BIT" -$ WRITE H_FILE "#define THIRTY_TWO_BIT" -$ WRITE H_FILE "#undef SIXTEEN_BIT" -$ WRITE H_FILE "#undef EIGHT_BIT" -$ WRITE H_FILE "#endif" -$! -$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c -$! before sha.h gets included (and HEADER_SHA_H defined), so we will not -$! protect this one... -$ WRITE H_FILE "#undef OPENSSL_NO_SHA512" -$ WRITE H_FILE "#define OPENSSL_NO_SHA512" -$! -$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION" -$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION" -$! -$! End -$! -$ ENDIF -$! -$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file -$! -$ CLOSE H_FILE -$! -$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file -$! -$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H -$! -$! That's All, Time To RETURN. -$! -$ RETURN -$! -$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file. -$! -$ BUILDINF: -$! -$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File. -$! -$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File." -$! -$! Create The [.CRYPTO._xxx]BUILDINF.H File. -$! -$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H" -$ CREATE /FDL=SYS$INPUT: 'BIH_NAME' -RECORD - FORMAT stream_lf -$! -$ OPEN /APPEND H_FILE 'bih_name' -$! -$! Get The Current Date & Time. -$! -$ TIME = F$TIME() -$! -$! Write The [.CRYPTO._xxx]BUILDINF.H File. -$! -$ WRITE H_FILE "#define CFLAGS ""/POINTER_SIZE=''POINTER_SIZE'""" -$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'""" -$ WRITE H_FILE "#define DATE ""''TIME'"" " -$! -$! Close The [.CRYPTO._xxx]BUILDINF.H File. -$! -$ CLOSE H_FILE -$! -$! Purge The [.CRYPTO._xxx]BUILDINF.H File. -$! -$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H -$! -$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix. -$! -$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN - - DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;* -$! -$! That's All, Time To RETURN. -$! -$ RETURN -$! -$! Copy a lot of files around. -$! -$ SOFTLINKS: -$! -$! Tell The User We Are Partly Rebuilding The [.APPS] Directory. -$! -$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File." -$! -$ DELETE SYS$DISK:[.APPS]MD4.C;* -$! -$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS] -$! -$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS] -$! -$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory. -$! -$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory." -$! -$! First, make sure the directory exists -$! -$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN - - CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL] -$! -$! Copy All The ".H" Files From The Main Directory. -$! -$ EXHEADER := e_os2.h -$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL] -$! -$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree. -$! -$ SDIRS := ,- - _'ARCH',- - OBJECTS,- - MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,- - DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,- - BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,- - BUFFER,BIO,STACK,LHASH,RAND,ERR,- - EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,- - STORE,CMS,PQUEUE,TS,JPAKE -$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h -$ EXHEADER__'ARCH' := opensslconf.h -$ EXHEADER_OBJECTS := objects.h,obj_mac.h -$ EXHEADER_MD2 := md2.h -$ EXHEADER_MD4 := md4.h -$ EXHEADER_MD5 := md5.h -$ EXHEADER_SHA := sha.h -$ EXHEADER_MDC2 := mdc2.h -$ EXHEADER_HMAC := hmac.h -$ EXHEADER_RIPEMD := ripemd.h -$ EXHEADER_WHRLPOOL := whrlpool.h -$ EXHEADER_DES := des.h,des_old.h -$ EXHEADER_AES := aes.h -$ EXHEADER_RC2 := rc2.h -$ EXHEADER_RC4 := rc4.h -$ EXHEADER_RC5 := rc5.h -$ EXHEADER_IDEA := idea.h -$ EXHEADER_BF := blowfish.h -$ EXHEADER_CAST := cast.h -$ EXHEADER_CAMELLIA := camellia.h -$ EXHEADER_SEED := seed.h -$ EXHEADER_MODES := modes.h -$ EXHEADER_BN := bn.h -$ EXHEADER_EC := ec.h -$ EXHEADER_RSA := rsa.h -$ EXHEADER_DSA := dsa.h -$ EXHEADER_ECDSA := ecdsa.h -$ EXHEADER_DH := dh.h -$ EXHEADER_ECDH := ecdh.h -$ EXHEADER_DSO := dso.h -$ EXHEADER_ENGINE := engine.h -$ EXHEADER_BUFFER := buffer.h -$ EXHEADER_BIO := bio.h -$ EXHEADER_STACK := stack.h,safestack.h -$ EXHEADER_LHASH := lhash.h -$ EXHEADER_RAND := rand.h -$ EXHEADER_ERR := err.h -$ EXHEADER_EVP := evp.h -$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h -$ EXHEADER_PEM := pem.h,pem2.h -$ EXHEADER_X509 := x509.h,x509_vfy.h -$ EXHEADER_X509V3 := x509v3.h -$ EXHEADER_CONF := conf.h,conf_api.h -$ EXHEADER_TXT_DB := txt_db.h -$ EXHEADER_PKCS7 := pkcs7.h -$ EXHEADER_PKCS12 := pkcs12.h -$ EXHEADER_COMP := comp.h -$ EXHEADER_OCSP := ocsp.h -$ EXHEADER_UI := ui.h,ui_compat.h -$ EXHEADER_KRB5 := krb5_asn.h -$!EXHEADER_STORE := store.h,str_compat.h -$ EXHEADER_STORE := store.h -$ EXHEADER_CMS := cms.h -$ EXHEADER_PQUEUE := pqueue.h -$ EXHEADER_TS := ts.h -$ EXHEADER_JPAKE := jpake.h -$ -$ I = 0 -$ LOOP_SDIRS: -$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM") -$ I = I + 1 -$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END -$ tmp = EXHEADER_'D' -$ IF D .EQS. "" -$ THEN -$ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG -$ ELSE -$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG -$ ENDIF -$ GOTO LOOP_SDIRS -$ LOOP_SDIRS_END: -$! -$! Copy All The ".H" Files From The [.SSL] Directory. -$! -$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h -$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL] -$! -$! Purge all doubles -$! -$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H -$! -$! That's All, Time To RETURN. -$! -$ RETURN -$! -$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB" Library. -$! -$ CRYPTO: -$! -$! Tell The User What We Are Doing. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB Library." -$! -$! Go To The [.CRYPTO] Directory. -$! -$ SET DEFAULT SYS$DISK:[.CRYPTO] -$! -$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. -$! -$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" -$! -$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications. -$! -$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" -$! -$! Go Back To The Main Directory. -$! -$ SET DEFAULT [-] -$! -$! Time To RETURN. -$! -$ RETURN -$! -$! Build The "[.xxx.EXE.SSL]LIBSSL''LIB32'.OLB" Library. -$! -$ SSL: -$! -$! Tell The User What We Are Doing. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL''LIB32'.OLB Library." -$! -$! Go To The [.SSL] Directory. -$! -$ SET DEFAULT SYS$DISK:[.SSL] -$! -$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library. -$! -$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" -$! -$! Go Back To The Main Directory. -$! -$ SET DEFAULT [-] -$! -$! Time To Return. -$! -$ RETURN -$! -$! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program. -$! -$ SSL_TASK: -$! -$! Tell The User What We Are Doing. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE" -$! -$! Go To The [.SSL] Directory. -$! -$ SET DEFAULT SYS$DISK:[.SSL] -$! -$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE -$! -$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" -$! -$! Go Back To The Main Directory. -$! -$ SET DEFAULT [-] -$! -$! That's All, Time To RETURN. -$! -$ RETURN -$! -$! Build The OpenSSL Test Programs. -$! -$ TEST: -$! -$! Tell The User What We Are Doing. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities." -$! -$! Go To The [.TEST] Directory. -$! -$ SET DEFAULT SYS$DISK:[.TEST] -$! -$! Build The Test Programs. -$! -$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" -$! -$! Go Back To The Main Directory. -$! -$ SET DEFAULT [-] -$! -$! That's All, Time To RETURN. -$! -$ RETURN -$! -$! Build The OpenSSL Application Programs. -$! -$ APPS: -$! -$! Tell The User What We Are Doing. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications." -$! -$! Go To The [.APPS] Directory. -$! -$ SET DEFAULT SYS$DISK:[.APPS] -$! -$! Build The Application Programs. -$! -$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "" "''POINTER_SIZE'" -$! -$! Go Back To The Main Directory. -$! -$ SET DEFAULT [-] -$! -$! That's All, Time To RETURN. -$! -$ RETURN -$! -$! Build The OpenSSL Application Programs. -$! -$ ENGINES: -$! -$! Tell The User What We Are Doing. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines." -$! -$! Go To The [.ENGINES] Directory. -$! -$ SET DEFAULT SYS$DISK:[.ENGINES] -$! -$! Build The Application Programs. -$! -$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" -$! -$! Go Back To The Main Directory. -$! -$ SET DEFAULT [-] -$! -$! That's All, Time To RETURN. -$! -$ RETURN -$! -$! Check The User's Options. -$! -$ CHECK_OPTIONS: -$! -$! Check if there's a "part", and separate it out -$! -$ BUILDPART = F$ELEMENT(1,"/",P1) -$ IF BUILDPART .EQS. "/" -$ THEN -$ BUILDPART = "" -$ ELSE -$ P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1) -$ ENDIF -$! -$! Check To See If P1 Is Blank. -$! -$ IF (P1.EQS."ALL") -$ THEN -$! -$! P1 Is ALL, So Build Everything. -$! -$ BUILDCOMMAND = "ALL" -$! -$! Else... -$! -$ ELSE -$! -$! Else, Check To See If P1 Has A Valid Argument. -$! -$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") - - .OR.(P1.EQS."BUILDALL") - - .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") - - .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") - - .OR.(P1.EQS."ENGINES") -$ THEN -$! -$! A Valid Argument. -$! -$ BUILDCOMMAND = P1 -$! -$! Else... -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] " -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG " -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " ALL : Just Build Everything." -$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file." -$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file." -$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links." -$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done." -$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." -$ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The" -$ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." -$ WRITE SYS$OUTPUT " SSL : To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library." -$ WRITE SYS$OUTPUT " SSL_TASK : To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program." -$ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs." -$ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs." -$ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture." -$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture." -$ WRITE SYS$OUTPUT " VAX : VAX Architecture." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ GOTO TIDY -$! -$! End The Valid Argument Check. -$! -$ ENDIF -$! -$! End The P1 Check. -$! -$ ENDIF -$! -$! Check To See If P2 Is Blank. -$! -$ IF (P2.EQS."") -$ THEN -$ POINTER_SIZE = "" -$ ELSE -$! -$! Check is P2 Is Valid -$! -$ IF (P2.EQS."32") -$ THEN -$ POINTER_SIZE = "32" -$ IF ARCH .EQS. "VAX" -$ THEN -$ LIB32 = "" -$ ELSE -$ LIB32 = "32" -$ ENDIF -$ ELSE -$ IF (P2.EQS."64") -$ THEN -$ LIB32 = "" -$ IF ARCH .EQS. "VAX" -$ THEN -$ POINTER_SIZE = "32" -$ ELSE -$ POINTER_SIZE = "64" -$ ENDIF -$ ELSE -$! -$! Tell The User Entered An Invalid Option.. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size" -$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size" -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ GOTO TIDY -$! -$! End The Valid Arguement Check. -$! -$ ENDIF -$ ENDIF -$! -$! End The P2 Check. -$! -$ ENDIF -$! -$! Check To See If P3 Is Blank. -$! -$ IF (P3.EQS."NODEBUG") -$ THEN -$! -$! P3 Is NODEBUG, So Compile Without Debugger Information. -$! -$ DEBUGGER = "NODEBUG" -$! -$! Else... -$! -$ ELSE -$! -$! Check To See If We Are To Compile With Debugger Information. -$! -$ IF (P3.EQS."DEBUG") -$ THEN -$! -$! Compile With Debugger Information. -$! -$ DEBUGGER = "DEBUG" -$! -$! Else... -$! -$ ELSE -$! -$! Tell The User Entered An Invalid Option.. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." -$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ GOTO TIDY -$! -$! End The Valid Argument Check. -$! -$ ENDIF -$! -$! End The P3 Check. -$! -$ ENDIF -$! -$! Check To See If P4 Is Blank. -$! -$ IF (P4.EQS."") -$ THEN -$! -$! O.K., The User Didn't Specify A Compiler, Let's Try To -$! Find Out Which One To Use. -$! -$! Check To See If We Have GNU C. -$! -$ IF (F$TRNLNM("GNU_CC").NES."") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ COMPILER = "GNUC" -$! -$! Tell The User We Are Using GNUC. -$! -$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." -$! -$! End The GNU C Compiler Check. -$! -$ ENDIF -$! -$! Check To See If We Have VAXC Or DECC. -$! -$ IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ COMPILER = "DECC" -$! -$! Tell The User We Are Using DECC. -$! -$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." -$! -$! Else... -$! -$ ELSE -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ COMPILER = "VAXC" -$! -$! Tell The User We Are Using VAX C. -$! -$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." -$! -$! End The DECC & VAXC Compiler Check. -$! -$ ENDIF -$! -$! Else... -$! -$ ELSE -$! -$! Check To See If The User Entered A Valid Paramter. -$! -$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK") -$ THEN -$! -$! Check To See If The User Wanted To Just LINK. -$! -$ IF (P4.EQS."LINK") -$ THEN -$! -$! Looks Like LINK-only -$! -$ COMPILER = "LINK" -$! -$! Tell The User We Are Only Linking. -$! -$ WRITE SYS$OUTPUT "LINK Only. This actually NOT YET SUPPORTED!" -$! -$! End LINK Check. -$! -$ ENDIF -$! -$! Check To See If The User Wanted DECC. -$! -$ IF (P4.EQS."DECC") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ COMPILER = "DECC" -$! -$! Tell The User We Are Using DECC. -$! -$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." -$! -$! End DECC Check. -$! -$ ENDIF -$! -$! Check To See If We Are To Use VAXC. -$! -$ IF (P4.EQS."VAXC") -$ THEN -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ COMPILER = "VAXC" -$! -$! Tell The User We Are Using VAX C. -$! -$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." -$! -$! End VAXC Check -$! -$ ENDIF -$! -$! Check To See If We Are To Use GNU C. -$! -$ IF (P4.EQS."GNUC") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ COMPILER = "GNUC" -$! -$! Tell The User We Are Using GNUC. -$! -$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." -$! -$! End The GNU C Check. -$! -$ ENDIF -$! -$! Else The User Entered An Invalid Argument. -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." -$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." -$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ GOTO TIDY -$! -$! End The Valid Argument Check. -$! -$ ENDIF -$! -$! End The P4 Check. -$! -$ ENDIF -$! -$! Time to check the contents of P5, and to make sure we get the correct library. -$! -$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" - - .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE" -$ THEN -$! -$! Check to see if SOCKETSHR was chosen -$! -$ IF P5.EQS."SOCKETSHR" -$ THEN -$! -$! Set the library to use SOCKETSHR -$! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" -$! -$! Done with SOCKETSHR -$! -$ ENDIF -$! -$! Check to see if MULTINET was chosen -$! -$ IF P5.EQS."MULTINET" -$ THEN -$! -$! Set the library to use UCX emulation. -$! -$ P5 = "UCX" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP" -$! -$! Done with MULTINET -$! -$ ENDIF -$! -$! Check to see if UCX was chosen -$! -$ IF P5.EQS."UCX" -$ THEN -$! -$! Set the library to use UCX. -$! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" -$! -$! Done with UCX -$! -$ ENDIF -$! -$! Check to see if TCPIP was chosen -$! -$ IF P5.EQS."TCPIP" -$ THEN -$! -$! Set the library to use TCPIP (post UCX). -$! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP" -$! -$! Done with TCPIP -$! -$ ENDIF -$! -$! Check to see if NONE was chosen -$! -$ IF P5.EQS."NONE" -$ THEN -$! -$! Do not use a TCPIP library. -$! -$ TCPIP_LIB = "" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used." -$! -$! Done with NONE. -$! -$ ENDIF -$! -$! Set the TCPIP_TYPE symbol -$! -$ TCPIP_TYPE = P5 -$! -$! Print info -$! -$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB -$! -$! Else The User Entered An Invalid Argument. -$! -$ ELSE -$ IF P5 .NES. "" -$ THEN -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P5," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." -$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." -$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library." -$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ GOTO TIDY -$ ELSE -$! -$! If TCPIP is not defined, then hardcode it to make -$! it clear that no TCPIP is desired. -$! -$ IF P5 .EQS. "" -$ THEN -$ TCPIP_LIB = "" -$ TCPIP_TYPE = "NONE" -$ ELSE -$! -$! Set the TCPIP_TYPE symbol -$! -$ TCPIP_TYPE = P5 -$ ENDIF -$ ENDIF -$! -$! Done with TCP/IP libraries -$! -$ ENDIF -$! -$! Special Threads For OpenVMS v7.1 Or Later -$! -$! Written By: Richard Levitte -$! richard@levitte.org -$! -$! -$! Check To See If We Have A Option For P6. -$! -$ IF (P6.EQS."") -$ THEN -$! -$! Get The Version Of VMS We Are Using. -$! -$ ISSEVEN := -$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION)) -$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) -$! -$! Check To See If The VMS Version Is v7.1 Or Later. -$! -$ IF (TMP.GE.71) -$ THEN -$! -$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. -$! -$ ISSEVEN := ,PTHREAD_USE_D4 -$! -$! End The VMS Version Check. -$! -$ ENDIF -$! -$! End The P6 Check. -$! -$ ENDIF -$! -$! Time To RETURN... -$! -$ RETURN -$! -$ TIDY: -$ SET DEFAULT 'DEF_ORIG' -$ EXIT -$! +$! +$! MAKEVMS.COM +$! Original Author: UNKNOWN +$! Rewritten By: Robert Byer +$! Vice-President +$! A-Com Computing, Inc. +$! byer@mail.all-net.net +$! +$! Changes by Richard Levitte +$! Zoltan Arpadffy +$! +$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" +$! "[.xxx.EXE.SSL]LIBSSL.OLB" +$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX. +$! +$! This procedures accepts two command line options listed below. +$! +$! Specify one of the following build options for P1. +$! +$! ALL Just build "everything". +$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file. +$! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file. +$! SOFTLINKS Just fix the Unix soft links. +$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done. +$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library. +$! CRYPTO/x Just build the x part of the +$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library. +$! SSL Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library. +$! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program. +$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL. +$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL. +$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL. +$! +$! +$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P2. +$! For 32 bit architectures (VAX), P2 is ignored. +$! Currently supported values are: +$! +$! 32 To ge a library compiled with /POINTER_SIZE=32 +$! 64 To ge a library compiled with /POINTER_SIZE=64 +$! +$! +$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging +$! information. +$! +$! Specify which compiler as P4 to try to compile under. +$! +$! VAXC For VAX C. +$! DECC For DEC C. +$! GNUC For GNU C. +$! LINK To only link the programs from existing object files. +$! (not yet implemented) +$! +$! If you don't specify a compiler, it will try to determine which +$! "C" compiler to use. +$! +$! P5, if defined, sets a TCP/IP library to use, through one of the following +$! keywords: +$! +$! UCX for UCX or UCX emulation +$! TCPIP for TCP/IP Services or TCP/IP Services emulation +$! (this is prefered over UCX) +$! SOCKETSHR for SOCKETSHR+NETLIB +$! NONE to avoid specifying which TCP/IP implementation to +$! use at build time (this works with DEC C). This is +$! the default. +$! +$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) +$! +$! +$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT") +$ ON ERROR THEN GOTO TIDY +$ ON CONTROL_C THEN GOTO TIDY +$! +$! Check if we're in a batch job, and make sure we get to +$! the directory this script is in +$! +$ IF F$MODE() .EQS. "BATCH" +$ THEN +$ COMNAME=F$ENVIRONMENT("PROCEDURE") +$ COMPATH=F$PARSE("A.;",COMNAME) - "A.;" +$ SET DEF 'COMPATH' +$ ENDIF +$! +$! Check What Architecture We Are Using. +$! +$ IF (F$GETSYI("CPU").LT.128) +$ THEN +$! +$! The Architecture Is VAX. +$! +$ ARCH = "VAX" +$! +$! Else... +$! +$ ELSE +$! +$! The Architecture Is Alpha, IA64 or whatever comes in the future. +$! +$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") +$ IF (ARCH .EQS. "") THEN ARCH = "UNK" +$! +$! End The Architecture Check. +$! +$ ENDIF +$! +$! Get VMS version. +$! +$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM") +$! +$! Check To Make Sure We Have Valid Command Line Parameters. +$! +$ GOSUB CHECK_OPTIONS +$! +$! Check To See What We Are To Do. +$! +$ IF (BUILDCOMMAND.EQS."ALL") +$ THEN +$! +$! Start with building the OpenSSL configuration file. +$! +$ GOSUB CONFIG +$! +$! Create The "BUILDINF.H" Include File. +$! +$ GOSUB BUILDINF +$! +$! Fix The Unix Softlinks. +$! +$ GOSUB SOFTLINKS +$! +$ ENDIF +$! +$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL") +$ THEN +$! +$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. +$! +$ GOSUB CRYPTO +$! +$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library. +$! +$ GOSUB SSL +$! +$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine. +$! +$ GOSUB SSL_TASK +$! +$! Build The [.xxx.EXE.TEST] OpenSSL Test Utilities. +$! +$ GOSUB TEST +$! +$! Build The [.xxx.EXE.APPS] OpenSSL Application Utilities. +$! +$ GOSUB APPS +$! +$! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines. +$! +$ GOSUB ENGINES +$! +$! Else... +$! +$ ELSE +$! +$! Build Just What The User Wants Us To Build. +$! +$ GOSUB 'BUILDCOMMAND' +$! +$ ENDIF +$! +$! Time To EXIT. +$! +$ GOTO TIDY +$! +$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file. +$! +$ CONFIG: +$! +$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File. +$! +$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File." +$! +$! First, make sure the directory exists. +$! +$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN - + CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH'] +$! +$! Different tar/UnZip versions/option may have named the file differently +$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. "" +$ THEN +$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in" +$ ELSE +$ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. "" +$ THEN +$ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in" +$ ELSE +$ ! For ODS-5 +$ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. "" +$ THEN +$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in" +$ ELSE +$ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!" +$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found". +$ GOTO TIDY +$ ENDIF +$ ENDIF +$ ENDIF +$! +$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File. +$! Make sure it has the right format. +$! +$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H" +$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME' +RECORD + FORMAT stream_lf +$ OPEN /APPEND H_FILE 'OSCH_NAME' +$! +$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File. +$! +$ WRITE H_FILE "/* This file was automatically built using makevms.com */" +$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */" +$! +$! Write a few macros that indicate how this system was built. +$! +$ WRITE H_FILE "" +$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS" +$ WRITE H_FILE "# define OPENSSL_SYS_VMS" +$ WRITE H_FILE "#endif" +$ +$! One of the best way to figure out what the list should be is to do +$! the followin on a Unix system: +$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq +$! For that reason, the list will also always end up in alphabetical order +$ CONFIG_LOGICALS := AES,- + ASM,INLINE_ASM,- + BF,- + BIO,- + BUFFER,- + BUF_FREELISTS,- + CAMELLIA,- + CAST,- + CMS,- + COMP,- + DEPRECATED,- + DES,- + DGRAM,- + DH,- + DSA,- + EC,- + ECDH,- + ECDSA,- + ENGINE,- + ERR,- + EVP,- + FP_API,- + GMP,- + GOST,- + HASH_COMP,- + HMAC,- + IDEA,- + JPAKE,- + KRB5,- + LHASH,- + MD2,- + MD4,- + MD5,- + MDC2,- + OCSP,- + PSK,- + RC2,- + RC4,- + RC5,- + RFC3779,- + RIPEMD,- + RSA,- + SEED,- + SHA,- + SHA0,- + SHA1,- + SHA256,- + SHA512,- + SOCK,- + SSL2,- + STACK,- + STATIC_ENGINE,- + STDIO,- + STORE,- + TLSEXT,- + WHIRLPOOL,- + X509 +$! Add a few that we know about +$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',- + THREADS +$! The following rules, which dictate how some algorithm choices affect +$! others, are picked from Configure. +$! Quick syntax: +$! list = item[ ; list] +$! item = algos / dependents +$! algos = algo [, algos] +$! dependents = dependent [, dependents] +$! When a list of algos is specified in one item, it means that they must +$! all be disabled for the rule to apply. +$! When a list of dependents is specified in one item, it means that they +$! will all be disabled if the rule applies. +$! Rules are checked sequentially. If a rule disables an algorithm, it will +$! affect all following rules that depend on that algorithm being disabled. +$! To force something to be enabled or disabled, have no algorithms in the +$! algos part. +$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;- + DES/MDC2;- + EC/ECDSA,ECDH;- + MD5/SSL2,SSL3,TLS1;- + SHA/SSL3,TLS1;- + RSA/SSL2;- + RSA,DSA/SSL2;- + DH/SSL3,TLS1;- + TLS1/TLSEXT;- + EC/GOST;- + DSA/GOST;- + DH/GOST;- + /STATIC_ENGINE;- + /KRB5 +$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;- + /THREADS +$ +$! Architecture specific rule addtions +$ IF ARCH .EQS. "VAX" +$ THEN +$ ! Disable algorithms that require 64 bit integers in C +$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + - + ";/GOST" + - + ";/WHIRLPOOL" +$ ENDIF +$ +$ CONFIG_LOG_I = 0 +$ CONFIG_LOG_LOOP1: +$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") +$ CONFIG_LOG_I = CONFIG_LOG_I + 1 +$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1 +$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END +$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E) +$ THEN +$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES +$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO +$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES +$ ELSE +$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO +$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES +$ ! Because all algorithms are assumed enabled by default +$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO +$ ENDIF +$ GOTO CONFIG_LOG_LOOP1 +$ CONFIG_LOG_LOOP1_END: +$ +$! Apply cascading disable rules +$ CONFIG_DISABLE_I = 0 +$ CONFIG_DISABLE_LOOP0: +$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM") +$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1 +$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0 +$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END +$ +$ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM") +$ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM") +$ TO_DISABLE := YES +$ CONFIG_ALGO_I = 0 +$ CONFIG_DISABLE_LOOP1: +$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM") +$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 +$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1 +$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END +$ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. "" +$ THEN +$ TO_DISABLE := NO +$ ELSE +$ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO +$ ENDIF +$ GOTO CONFIG_DISABLE_LOOP1 +$ CONFIG_DISABLE_LOOP1_END: +$ +$ IF TO_DISABLE +$ THEN +$ CONFIG_DEPENDENT_I = 0 +$ CONFIG_DISABLE_LOOP2: +$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM") +$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 +$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2 +$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END +$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES +$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO +$ ! Better not to assume defaults at this point... +$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES +$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'" +$ GOTO CONFIG_DISABLE_LOOP2 +$ CONFIG_DISABLE_LOOP2_END: +$ ENDIF +$ GOTO CONFIG_DISABLE_LOOP0 +$ CONFIG_DISABLE_LOOP0_END: +$ +$! Apply cascading enable rules +$ CONFIG_ENABLE_I = 0 +$ CONFIG_ENABLE_LOOP0: +$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM") +$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1 +$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0 +$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END +$ +$ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM") +$ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM") +$ TO_ENABLE := YES +$ CONFIG_ALGO_I = 0 +$ CONFIG_ENABLE_LOOP1: +$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM") +$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 +$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1 +$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END +$ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. "" +$ THEN +$ TO_ENABLE := NO +$ ELSE +$ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO +$ ENDIF +$ GOTO CONFIG_ENABLE_LOOP1 +$ CONFIG_ENABLE_LOOP1_END: +$ +$ IF TO_ENABLE +$ THEN +$ CONFIG_DEPENDENT_I = 0 +$ CONFIG_ENABLE_LOOP2: +$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM") +$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 +$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2 +$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END +$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO +$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES +$ ! Better not to assume defaults at this point... +$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES +$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'" +$ GOTO CONFIG_ENABLE_LOOP2 +$ CONFIG_ENABLE_LOOP2_END: +$ ENDIF +$ GOTO CONFIG_ENABLE_LOOP0 +$ CONFIG_ENABLE_LOOP0_END: +$ +$! Write to the configuration +$ CONFIG_LOG_I = 0 +$ CONFIG_LOG_LOOP2: +$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") +$ CONFIG_LOG_I = CONFIG_LOG_I + 1 +$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2 +$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END +$ IF CONFIG_CHANGED_'CONFIG_LOG_E' +$ THEN +$ IF CONFIG_DISABLED_'CONFIG_LOG_E' +$ THEN +$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E +$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E +$ WRITE H_FILE "#endif" +$ ELSE +$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E +$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E +$ WRITE H_FILE "#endif" +$ ENDIF +$ ENDIF +$ GOTO CONFIG_LOG_LOOP2 +$ CONFIG_LOG_LOOP2_END: +$! +$! Add in the common "crypto/opensslconf.h.in". +$! +$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE: +$! +$ IF ARCH .NES. "VAX" +$ THEN +$! +$! Write the non-VAX specific data +$! +$ WRITE H_FILE "#if defined(HEADER_RC4_H)" +$ WRITE H_FILE "#undef RC4_INT" +$ WRITE H_FILE "#define RC4_INT unsigned int" +$ WRITE H_FILE "#undef RC4_CHUNK" +$ WRITE H_FILE "#define RC4_CHUNK unsigned long long" +$ WRITE H_FILE "#endif" +$! +$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)" +$ WRITE H_FILE "#undef DES_LONG" +$ WRITE H_FILE "#define DES_LONG unsigned int" +$ WRITE H_FILE "#undef DES_PTR" +$ WRITE H_FILE "#define DES_PTR" +$ WRITE H_FILE "#undef DES_RISC1" +$ WRITE H_FILE "#undef DES_RISC2" +$ WRITE H_FILE "#define DES_RISC1" +$ WRITE H_FILE "#undef DES_UNROLL" +$ WRITE H_FILE "#define DES_UNROLL" +$ WRITE H_FILE "#endif" +$! +$ WRITE H_FILE "#if defined(HEADER_BN_H)" +$ WRITE H_FILE "#undef BN_LLONG" ! Never define with SIXTY_FOUR_BIT +$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG" +$ WRITE H_FILE "#undef SIXTY_FOUR_BIT" +$ WRITE H_FILE "#define SIXTY_FOUR_BIT" +$ WRITE H_FILE "#undef THIRTY_TWO_BIT" +$ WRITE H_FILE "#undef SIXTEEN_BIT" +$ WRITE H_FILE "#undef EIGHT_BIT" +$ WRITE H_FILE "#endif" +$ +$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION" +$! +$! Else... +$! +$ ELSE +$! +$! Write the VAX specific data +$! +$ WRITE H_FILE "#if defined(HEADER_RC4_H)" +$ WRITE H_FILE "#undef RC4_INT" +$ WRITE H_FILE "#define RC4_INT unsigned char" +$ WRITE H_FILE "#undef RC4_CHUNK" +$ WRITE H_FILE "#define RC4_CHUNK unsigned long" +$ WRITE H_FILE "#endif" +$! +$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)" +$ WRITE H_FILE "#undef DES_LONG" +$ WRITE H_FILE "#define DES_LONG unsigned long" +$ WRITE H_FILE "#undef DES_PTR" +$ WRITE H_FILE "#define DES_PTR" +$ WRITE H_FILE "#undef DES_RISC1" +$ WRITE H_FILE "#undef DES_RISC2" +$ WRITE H_FILE "#undef DES_UNROLL" +$ WRITE H_FILE "#endif" +$! +$ WRITE H_FILE "#if defined(HEADER_BN_H)" +$ WRITE H_FILE "#undef BN_LLONG" ! VAX C/DEC C doesn't have long long +$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG" +$ WRITE H_FILE "#undef SIXTY_FOUR_BIT" +$ WRITE H_FILE "#undef THIRTY_TWO_BIT" +$ WRITE H_FILE "#define THIRTY_TWO_BIT" +$ WRITE H_FILE "#undef SIXTEEN_BIT" +$ WRITE H_FILE "#undef EIGHT_BIT" +$ WRITE H_FILE "#endif" +$! +$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c +$! before sha.h gets included (and HEADER_SHA_H defined), so we will not +$! protect this one... +$ WRITE H_FILE "#undef OPENSSL_NO_SHA512" +$ WRITE H_FILE "#define OPENSSL_NO_SHA512" +$! +$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION" +$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION" +$! +$! End +$! +$ ENDIF +$! +$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file +$! +$ CLOSE H_FILE +$! +$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file +$! +$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H +$! +$! That's All, Time To RETURN. +$! +$ RETURN +$! +$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file. +$! +$ BUILDINF: +$! +$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File. +$! +$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File." +$! +$! Create The [.CRYPTO._xxx]BUILDINF.H File. +$! +$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H" +$ CREATE /FDL=SYS$INPUT: 'BIH_NAME' +RECORD + FORMAT stream_lf +$! +$ OPEN /APPEND H_FILE 'bih_name' +$! +$! Get The Current Date & Time. +$! +$ TIME = F$TIME() +$! +$! Write The [.CRYPTO._xxx]BUILDINF.H File. +$! +$ WRITE H_FILE "#define CFLAGS ""/POINTER_SIZE=''POINTER_SIZE'""" +$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'""" +$ WRITE H_FILE "#define DATE ""''TIME'"" " +$! +$! Close The [.CRYPTO._xxx]BUILDINF.H File. +$! +$ CLOSE H_FILE +$! +$! Purge The [.CRYPTO._xxx]BUILDINF.H File. +$! +$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H +$! +$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix. +$! +$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN - + DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;* +$! +$! That's All, Time To RETURN. +$! +$ RETURN +$! +$! Copy a lot of files around. +$! +$ SOFTLINKS: +$! +$! Tell The User We Are Partly Rebuilding The [.APPS] Directory. +$! +$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File." +$! +$ DELETE SYS$DISK:[.APPS]MD4.C;* +$! +$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS] +$! +$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS] +$! +$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory. +$! +$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory." +$! +$! First, make sure the directory exists +$! +$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN - + CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL] +$! +$! Copy All The ".H" Files From The Main Directory. +$! +$ EXHEADER := e_os2.h +$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL] +$! +$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree. +$! +$ SDIRS := ,- + _'ARCH',- + OBJECTS,- + MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,- + DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,- + BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,- + BUFFER,BIO,STACK,LHASH,RAND,ERR,- + EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,- + STORE,CMS,PQUEUE,TS,JPAKE +$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h +$ EXHEADER__'ARCH' := opensslconf.h +$ EXHEADER_OBJECTS := objects.h,obj_mac.h +$ EXHEADER_MD2 := md2.h +$ EXHEADER_MD4 := md4.h +$ EXHEADER_MD5 := md5.h +$ EXHEADER_SHA := sha.h +$ EXHEADER_MDC2 := mdc2.h +$ EXHEADER_HMAC := hmac.h +$ EXHEADER_RIPEMD := ripemd.h +$ EXHEADER_WHRLPOOL := whrlpool.h +$ EXHEADER_DES := des.h,des_old.h +$ EXHEADER_AES := aes.h +$ EXHEADER_RC2 := rc2.h +$ EXHEADER_RC4 := rc4.h +$ EXHEADER_RC5 := rc5.h +$ EXHEADER_IDEA := idea.h +$ EXHEADER_BF := blowfish.h +$ EXHEADER_CAST := cast.h +$ EXHEADER_CAMELLIA := camellia.h +$ EXHEADER_SEED := seed.h +$ EXHEADER_MODES := modes.h +$ EXHEADER_BN := bn.h +$ EXHEADER_EC := ec.h +$ EXHEADER_RSA := rsa.h +$ EXHEADER_DSA := dsa.h +$ EXHEADER_ECDSA := ecdsa.h +$ EXHEADER_DH := dh.h +$ EXHEADER_ECDH := ecdh.h +$ EXHEADER_DSO := dso.h +$ EXHEADER_ENGINE := engine.h +$ EXHEADER_BUFFER := buffer.h +$ EXHEADER_BIO := bio.h +$ EXHEADER_STACK := stack.h,safestack.h +$ EXHEADER_LHASH := lhash.h +$ EXHEADER_RAND := rand.h +$ EXHEADER_ERR := err.h +$ EXHEADER_EVP := evp.h +$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h +$ EXHEADER_PEM := pem.h,pem2.h +$ EXHEADER_X509 := x509.h,x509_vfy.h +$ EXHEADER_X509V3 := x509v3.h +$ EXHEADER_CONF := conf.h,conf_api.h +$ EXHEADER_TXT_DB := txt_db.h +$ EXHEADER_PKCS7 := pkcs7.h +$ EXHEADER_PKCS12 := pkcs12.h +$ EXHEADER_COMP := comp.h +$ EXHEADER_OCSP := ocsp.h +$ EXHEADER_UI := ui.h,ui_compat.h +$ EXHEADER_KRB5 := krb5_asn.h +$!EXHEADER_STORE := store.h,str_compat.h +$ EXHEADER_STORE := store.h +$ EXHEADER_CMS := cms.h +$ EXHEADER_PQUEUE := pqueue.h +$ EXHEADER_TS := ts.h +$ EXHEADER_JPAKE := jpake.h +$ +$ I = 0 +$ LOOP_SDIRS: +$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM") +$ I = I + 1 +$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END +$ tmp = EXHEADER_'D' +$ IF D .EQS. "" +$ THEN +$ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG +$ ELSE +$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG +$ ENDIF +$ GOTO LOOP_SDIRS +$ LOOP_SDIRS_END: +$! +$! Copy All The ".H" Files From The [.SSL] Directory. +$! +$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h +$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL] +$! +$! Purge all doubles +$! +$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H +$! +$! That's All, Time To RETURN. +$! +$ RETURN +$! +$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB" Library. +$! +$ CRYPTO: +$! +$! Tell The User What We Are Doing. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB Library." +$! +$! Go To The [.CRYPTO] Directory. +$! +$ SET DEFAULT SYS$DISK:[.CRYPTO] +$! +$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. +$! +$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" +$! +$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications. +$! +$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" +$! +$! Go Back To The Main Directory. +$! +$ SET DEFAULT [-] +$! +$! Time To RETURN. +$! +$ RETURN +$! +$! Build The "[.xxx.EXE.SSL]LIBSSL''LIB32'.OLB" Library. +$! +$ SSL: +$! +$! Tell The User What We Are Doing. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL''LIB32'.OLB Library." +$! +$! Go To The [.SSL] Directory. +$! +$ SET DEFAULT SYS$DISK:[.SSL] +$! +$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library. +$! +$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" +$! +$! Go Back To The Main Directory. +$! +$ SET DEFAULT [-] +$! +$! Time To Return. +$! +$ RETURN +$! +$! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program. +$! +$ SSL_TASK: +$! +$! Tell The User What We Are Doing. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE" +$! +$! Go To The [.SSL] Directory. +$! +$ SET DEFAULT SYS$DISK:[.SSL] +$! +$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE +$! +$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" +$! +$! Go Back To The Main Directory. +$! +$ SET DEFAULT [-] +$! +$! That's All, Time To RETURN. +$! +$ RETURN +$! +$! Build The OpenSSL Test Programs. +$! +$ TEST: +$! +$! Tell The User What We Are Doing. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities." +$! +$! Go To The [.TEST] Directory. +$! +$ SET DEFAULT SYS$DISK:[.TEST] +$! +$! Build The Test Programs. +$! +$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" +$! +$! Go Back To The Main Directory. +$! +$ SET DEFAULT [-] +$! +$! That's All, Time To RETURN. +$! +$ RETURN +$! +$! Build The OpenSSL Application Programs. +$! +$ APPS: +$! +$! Tell The User What We Are Doing. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications." +$! +$! Go To The [.APPS] Directory. +$! +$ SET DEFAULT SYS$DISK:[.APPS] +$! +$! Build The Application Programs. +$! +$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "" "''POINTER_SIZE'" +$! +$! Go Back To The Main Directory. +$! +$ SET DEFAULT [-] +$! +$! That's All, Time To RETURN. +$! +$ RETURN +$! +$! Build The OpenSSL Application Programs. +$! +$ ENGINES: +$! +$! Tell The User What We Are Doing. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines." +$! +$! Go To The [.ENGINES] Directory. +$! +$ SET DEFAULT SYS$DISK:[.ENGINES] +$! +$! Build The Application Programs. +$! +$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" +$! +$! Go Back To The Main Directory. +$! +$ SET DEFAULT [-] +$! +$! That's All, Time To RETURN. +$! +$ RETURN +$! +$! Check The User's Options. +$! +$ CHECK_OPTIONS: +$! +$! Check if there's a "part", and separate it out +$! +$ BUILDPART = F$ELEMENT(1,"/",P1) +$ IF BUILDPART .EQS. "/" +$ THEN +$ BUILDPART = "" +$ ELSE +$ P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1) +$ ENDIF +$! +$! Check To See If P1 Is Blank. +$! +$ IF (P1.EQS."ALL") +$ THEN +$! +$! P1 Is ALL, So Build Everything. +$! +$ BUILDCOMMAND = "ALL" +$! +$! Else... +$! +$ ELSE +$! +$! Else, Check To See If P1 Has A Valid Argument. +$! +$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") - + .OR.(P1.EQS."BUILDALL") - + .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") - + .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") - + .OR.(P1.EQS."ENGINES") +$ THEN +$! +$! A Valid Argument. +$! +$ BUILDCOMMAND = P1 +$! +$! Else... +$! +$ ELSE +$! +$! Tell The User We Don't Know What They Want. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] " +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG " +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " ALL : Just Build Everything." +$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file." +$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file." +$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links." +$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done." +$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." +$ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The" +$ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." +$ WRITE SYS$OUTPUT " SSL : To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library." +$ WRITE SYS$OUTPUT " SSL_TASK : To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program." +$ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs." +$ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs." +$ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture." +$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture." +$ WRITE SYS$OUTPUT " VAX : VAX Architecture." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ GOTO TIDY +$! +$! End The Valid Argument Check. +$! +$ ENDIF +$! +$! End The P1 Check. +$! +$ ENDIF +$! +$! Check To See If P2 Is Blank. +$! +$ IF (P2.EQS."") +$ THEN +$ POINTER_SIZE = "" +$ ELSE +$! +$! Check is P2 Is Valid +$! +$ IF (P2.EQS."32") +$ THEN +$ POINTER_SIZE = "32" +$ IF ARCH .EQS. "VAX" +$ THEN +$ LIB32 = "" +$ ELSE +$ LIB32 = "32" +$ ENDIF +$ ELSE +$ IF (P2.EQS."64") +$ THEN +$ LIB32 = "" +$ IF ARCH .EQS. "VAX" +$ THEN +$ POINTER_SIZE = "32" +$ ELSE +$ POINTER_SIZE = "64" +$ ENDIF +$ ELSE +$! +$! Tell The User Entered An Invalid Option.. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size" +$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size" +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ GOTO TIDY +$! +$! End The Valid Arguement Check. +$! +$ ENDIF +$ ENDIF +$! +$! End The P2 Check. +$! +$ ENDIF +$! +$! Check To See If P3 Is Blank. +$! +$ IF (P3.EQS."NODEBUG") +$ THEN +$! +$! P3 Is NODEBUG, So Compile Without Debugger Information. +$! +$ DEBUGGER = "NODEBUG" +$! +$! Else... +$! +$ ELSE +$! +$! Check To See If We Are To Compile With Debugger Information. +$! +$ IF (P3.EQS."DEBUG") +$ THEN +$! +$! Compile With Debugger Information. +$! +$ DEBUGGER = "DEBUG" +$! +$! Else... +$! +$ ELSE +$! +$! Tell The User Entered An Invalid Option.. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." +$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ GOTO TIDY +$! +$! End The Valid Argument Check. +$! +$ ENDIF +$! +$! End The P3 Check. +$! +$ ENDIF +$! +$! Check To See If P4 Is Blank. +$! +$ IF (P4.EQS."") +$ THEN +$! +$! O.K., The User Didn't Specify A Compiler, Let's Try To +$! Find Out Which One To Use. +$! +$! Check To See If We Have GNU C. +$! +$ IF (F$TRNLNM("GNU_CC").NES."") +$ THEN +$! +$! Looks Like GNUC, Set To Use GNUC. +$! +$ COMPILER = "GNUC" +$! +$! Tell The User We Are Using GNUC. +$! +$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." +$! +$! End The GNU C Compiler Check. +$! +$ ENDIF +$! +$! Check To See If We Have VAXC Or DECC. +$! +$ IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC") +$ THEN +$! +$! Looks Like DECC, Set To Use DECC. +$! +$ COMPILER = "DECC" +$! +$! Tell The User We Are Using DECC. +$! +$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." +$! +$! Else... +$! +$ ELSE +$! +$! Looks Like VAXC, Set To Use VAXC. +$! +$ COMPILER = "VAXC" +$! +$! Tell The User We Are Using VAX C. +$! +$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." +$! +$! End The DECC & VAXC Compiler Check. +$! +$ ENDIF +$! +$! Else... +$! +$ ELSE +$! +$! Check To See If The User Entered A Valid Paramter. +$! +$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK") +$ THEN +$! +$! Check To See If The User Wanted To Just LINK. +$! +$ IF (P4.EQS."LINK") +$ THEN +$! +$! Looks Like LINK-only +$! +$ COMPILER = "LINK" +$! +$! Tell The User We Are Only Linking. +$! +$ WRITE SYS$OUTPUT "LINK Only. This actually NOT YET SUPPORTED!" +$! +$! End LINK Check. +$! +$ ENDIF +$! +$! Check To See If The User Wanted DECC. +$! +$ IF (P4.EQS."DECC") +$ THEN +$! +$! Looks Like DECC, Set To Use DECC. +$! +$ COMPILER = "DECC" +$! +$! Tell The User We Are Using DECC. +$! +$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." +$! +$! End DECC Check. +$! +$ ENDIF +$! +$! Check To See If We Are To Use VAXC. +$! +$ IF (P4.EQS."VAXC") +$ THEN +$! +$! Looks Like VAXC, Set To Use VAXC. +$! +$ COMPILER = "VAXC" +$! +$! Tell The User We Are Using VAX C. +$! +$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." +$! +$! End VAXC Check +$! +$ ENDIF +$! +$! Check To See If We Are To Use GNU C. +$! +$ IF (P4.EQS."GNUC") +$ THEN +$! +$! Looks Like GNUC, Set To Use GNUC. +$! +$ COMPILER = "GNUC" +$! +$! Tell The User We Are Using GNUC. +$! +$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." +$! +$! End The GNU C Check. +$! +$ ENDIF +$! +$! Else The User Entered An Invalid Argument. +$! +$ ELSE +$! +$! Tell The User We Don't Know What They Want. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." +$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." +$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ GOTO TIDY +$! +$! End The Valid Argument Check. +$! +$ ENDIF +$! +$! End The P4 Check. +$! +$ ENDIF +$! +$! Time to check the contents of P5, and to make sure we get the correct library. +$! +$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" - + .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE" +$ THEN +$! +$! Check to see if SOCKETSHR was chosen +$! +$ IF P5.EQS."SOCKETSHR" +$ THEN +$! +$! Set the library to use SOCKETSHR +$! +$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" +$! +$! Done with SOCKETSHR +$! +$ ENDIF +$! +$! Check to see if MULTINET was chosen +$! +$ IF P5.EQS."MULTINET" +$ THEN +$! +$! Set the library to use UCX emulation. +$! +$ P5 = "UCX" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP" +$! +$! Done with MULTINET +$! +$ ENDIF +$! +$! Check to see if UCX was chosen +$! +$ IF P5.EQS."UCX" +$ THEN +$! +$! Set the library to use UCX. +$! +$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" +$! +$! Done with UCX +$! +$ ENDIF +$! +$! Check to see if TCPIP was chosen +$! +$ IF P5.EQS."TCPIP" +$ THEN +$! +$! Set the library to use TCPIP (post UCX). +$! +$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP" +$! +$! Done with TCPIP +$! +$ ENDIF +$! +$! Check to see if NONE was chosen +$! +$ IF P5.EQS."NONE" +$ THEN +$! +$! Do not use a TCPIP library. +$! +$ TCPIP_LIB = "" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used." +$! +$! Done with NONE. +$! +$ ENDIF +$! +$! Set the TCPIP_TYPE symbol +$! +$ TCPIP_TYPE = P5 +$! +$! Print info +$! +$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB +$! +$! Else The User Entered An Invalid Argument. +$! +$ ELSE +$ IF P5 .NES. "" +$ THEN +$! +$! Tell The User We Don't Know What They Want. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P5," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." +$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." +$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library." +$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ GOTO TIDY +$ ELSE +$! +$! If TCPIP is not defined, then hardcode it to make +$! it clear that no TCPIP is desired. +$! +$ IF P5 .EQS. "" +$ THEN +$ TCPIP_LIB = "" +$ TCPIP_TYPE = "NONE" +$ ELSE +$! +$! Set the TCPIP_TYPE symbol +$! +$ TCPIP_TYPE = P5 +$ ENDIF +$ ENDIF +$! +$! Done with TCP/IP libraries +$! +$ ENDIF +$! +$! Special Threads For OpenVMS v7.1 Or Later +$! +$! Written By: Richard Levitte +$! richard@levitte.org +$! +$! +$! Check To See If We Have A Option For P6. +$! +$ IF (P6.EQS."") +$ THEN +$! +$! Get The Version Of VMS We Are Using. +$! +$ ISSEVEN := +$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION)) +$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) +$! +$! Check To See If The VMS Version Is v7.1 Or Later. +$! +$ IF (TMP.GE.71) +$ THEN +$! +$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. +$! +$ ISSEVEN := ,PTHREAD_USE_D4 +$! +$! End The VMS Version Check. +$! +$ ENDIF +$! +$! End The P6 Check. +$! +$ ENDIF +$! +$! Time To RETURN... +$! +$ RETURN +$! +$ TIDY: +$ SET DEFAULT 'DEF_ORIG' +$ EXIT +$! -- cgit v1.2.3