nx-libs/nx-X11/programs/Xserver/dix/main.c, branch 3.5.99.8

Xserver: Support building against libXfont2 (v2) API and old libXfont(1) API alike.

2017-04-10T14:09:20+00:00

Fixes ArcticaProject/nx-libs#296. Inspired by the following X.org commit. Other than X.org, we will continue support for building nx-libs against libXfont1 for a while. commit 05a793f5b3c40747d5a92a076def7f4fb673c7e7 Author: Keith Packard Date: Tue Sep 1 18:50:55 2015 -0700 dix: Switch to the libXfont2 API (v2) This new libXfont API eliminates exposing internal X server symbols to the font library, replacing those with a struct full of the entire API needed to use that library. v2: Use libXfont2 instead of libXfont_2 Signed-off-by: Keith Packard Reviewed-by: Adam Jackson

SetFontPath: set client->errorValue on failure.

2017-04-10T14:03:10+00:00

Backported from X.org: commit 21ceae9002c6364deb3d074cf2da7d3864cf6879 Author: Jamey Sharp Date: Tue May 11 10:24:00 2010 -0700 SetFontPath: set client->errorValue on failure. Previously the callers were only setting errorValue on Success, when it's ignored, and leaving it alone on failure, when it's sent to the client. Since SetFontPath takes the ClientPtr, let it set client->errorValue instead of letting the callers continue to get it wrong. Signed-off-by: Jamey Sharp Reviewed-by: Julien Cristau Signed-off-by: Keith Packard Backported-to-NX-by: Mike Gabriel

dix: pass a valid ClientPtr to SetFontPath in all cases.

2017-04-10T14:03:10+00:00

Backported from X.org: commit 7e9e01a4a34fa45521067d43c5bbff942dd5d51a Author: Eamon Walsh Date: Wed Oct 10 17:40:22 2007 -0400 dix: pass a valid ClientPtr to SetFontPath in all cases. Backported-to-NX-by: Mike Gabriel

dix: Move InitFonts up above screen initialization

2017-04-10T14:03:10+00:00

Backport from X.org: commit 91ea0965dd4dfeba0a914c47ad4a64768e983b1b Author: Keith Packard Date: Wed Nov 11 22:02:04 2015 -0800 dix: Move InitFonts up above screen initialization Font initialization was split into two stages, the first was to set up font privates with a call to ResetFontPrivateIndex, then much later the call to InitFonts to set up all of the FPEs. Doing the full font initialization before initializing the video drivers means that we can move the call to ResetFontPrivateIndex inside InitFonts. Reviewed-by: Adam Jackson Signed-off-by: Keith Packard Backported-to-NX-by: Mike Gabriel

xserver: remove index from CloseScreen (API/ABI breakage)

2017-04-10T12:56:29+00:00

Extracted from X.org bulk commit: commit 1f0e8bd5eb1a5539689cfc4f5a6b86b530907ec5 Author: Dave Airlie Date: Tue Jun 5 13:22:18 2012 +0100 api: rework the X server driver API to avoid global arrays. This is a squash merge containing all the API changes, as well as the video ABI bump. Its been squashed to make bisection easier. Full patch log below: [...] commit 06729dbbc804a20242e6499f446acb5d94023c3c Author: Dave Airlie Date: Tue Apr 10 14:04:59 2012 +0100 xserver: remove index from CloseScreen (API/ABI breakage) This drops the index from the CloseScreen callback, its always been useless really, since the pScreen contains it. Reviewed-by: Alan Coopersmith Acked-by: Aaron Plattner Reviewed-by: Adam Jackson Signed-off-by: Dave Airlie

dix: Remove insane BC hacks

2017-03-24T08:19:47+00:00

commit 6b5206e7cb8e5279816b48f014d47d3f03f16972 Author: Daniel Stone Date: Fri Jul 18 15:38:10 2008 +0300 dix: Remove insane BC hacks If your DDX needs a 1bpp mode and doesn't set it up, your DDX is incompetent. Backported-to-NX-by: Mike Gabriel

dix: Move AddScreen() over into dispatch.c and introduce init_screen()

2017-03-24T08:19:30+00:00

Partially pruned out of X.org commits: commit 987579c930bda803427a28cb82773c389f5110d6 Author: Peter Hutterer Date: Wed Apr 22 13:26:40 2009 +1000 dix: remove all but main() from main.c All other functions are pushed into where they seemed to fit. main.c is now linked separately into libmain.a and linked in by the various DDXs. Signed-off-by: Peter Hutterer commit 3478af3374abffa0c226ee077fda1fcfc0751e74 Author: Dave Airlie Date: Tue Jun 5 17:01:21 2012 +0100 screen: split out screen init code. (v2) This is a precursor for reusing this code to init gpu screens. v2: fixup int check as per Keith's review. Reviewed-by: Keith Packard Signed-off-by: Dave Airlie Backported-to-NX-by: Mike Gabriel

Move SIGUSR1 notification as late as possible.

2017-03-21T09:58:08+00:00

commit f01e149d1af14ef9ee0e8a6743ab6a08f3bb677c Author: Adam Jackson Date: Thu Nov 1 15:41:11 2007 -0400 Move SIGUSR1 notification as late as possible. If we inherited a signal mask from the parent process that ignores SIGUSR1, then we will send SIGUSR1 to the parent to indicate when we're ready to accept connections. Unfortunately, we send this notification way too early, right after creating the sockets rather than just before entering the main loop. Move it to just before Dispatch() so we're not lying quite so much. Backported-to-NX-by: Mike Gabriel

os: Add facilities for client ID tracking.

2017-03-21T09:58:07+00:00

commit 6d6d4cb6043905d850834946e9bfc526ed5a9ef7 Author: Matthieu Herrb Date: Mon Jan 2 13:23:59 2012 +0000 Add OpenBSD support to DetermineClientCmd() Uses kvm_getargv() from libkvm. Signed-off-by: Matthieu Herrb Reviewed-by: Adam Jackson Signed-off-by: Keith Packard commit cfc4c3d7fa8bd4da4c08b2ab8e6f85435f75353a Author: Alan Coopersmith Date: Sat Dec 24 10:00:56 2011 -0800 Add Solaris support to DetermineClientCmd Uses /proc/pid/psinfo to read command & partial arguments. Moves cmdsize & argsize variables into non-Solaris #else clause to avoid unused variable warnings. Fixes format mismatch errors when building with DEBUG defined on a 64-bit platform (where Mask is defined as CARD32). Signed-off-by: Alan Coopersmith Reviewed-by: Rami Ylimäki Signed-off-by: Keith Packard commit 780133f9ae7fada462714b47e79d26075bbd9abe Author: Alan Coopersmith Date: Fri Oct 28 21:29:50 2011 -0700 Convert DetermineClientCmd to use strdup instead of malloc+strncpy *cmdname is initialized to NULL earlier in the function, so it's okay to overwrite it with NULL if strdup fails, don't need that extra check. Signed-off-by: Alan Coopersmith Reviewed-by: Jeremy Huddleston commit 2ef4ff45ef1fcfc4967ebe3d550408769e5f6500 Author: Erkki Seppälä Date: Fri Mar 25 10:38:23 2011 +0200 os/client: Prevent rare fd leak in DetermineClientPid DetermineClientPid didn't close file descriptor if read on /proc/pid/cmdline failed. Adjusted the code to disregard the close return value and perform the return after that, if the read failed or returned EOF. Signed-off-by: Mark Kettenis Signed-off-by: Erkki Seppälä Reviewed-by: Rami Ylimäki Signed-off-by: Keith Packard commit 1e933665bef26c74196bb7c59910e6a78bcacf0e Author: Rami Ylimäki Date: Wed Dec 22 16:51:09 2010 +0200 os: Add facilities for client ID tracking. An interface is provided for figuring out the PID and process name of a client. Make some existing functionality from SELinux and IA extensions available for general use. Signed-off-by: Rami Ylimäki Reviewed-by: Tiago Vignatti Backported-to-NX-by: Mike Gabriel

Xserver/dix/main.c: ErrorF requires a string to end with an EOL char.

2017-02-27T11:07:30+00:00